Categorías de Producto
Contacto
86.13603880312
info@lythbattery.com
+8613603880312
Añade WhatsApp para obtener más detalles
Proveedor líder de baterías de fosfato de hierro y litio en China - LYTH
- Llámenos al
86-13603880312 - Envíanos un correo electrónico
info@lythbattery.com - Whatsapp
+8613603880312
Silicone Rubber Heating Film for Battery Module Bottom Heating
CATEGORÍA Y ETIQUETAS:Accesorios investigación
- Especificaciones
Silicone rubber heating film is designed for battery module heating applications that require flexibility, electrical insulation, and reliable dielectric strength. It uses B-stage silicone rubber and a resistive heating element to provide a compact, adhesive-backed heating structure.
The heater is bonded to the bottom of the battery module and transfers heat to the cells through thermal conduction. This supports battery startup and stable operation in low-temperature environments.
Estructura del producto
| Articulo | Valor |
|---|---|
| Materia prima | B-stage silicone rubber |
| Elemento calefactor | Resistive heating element |
| Capa adhesiva | Double-sided adhesive |
| Power Lead | UL3239 16 AWG silicone wire |
| Terminal | Molex 0768230321 |
| Structure | Silicone + heating element + silicone + adhesive |
| Formulario de producto | Flexible adhesive-backed heater |
Parámetros técnicos
| Articulo | Valor |
|---|---|
| Voltaje nominal | 51.2 VCC |
| Maximum Voltage | 60 VCC |
| Potencia nominal | 400 W |
| Rated Resistance | 6.6 Ω ±20% |
| Dielectric Withstand | 2700 VDC for 1 minute |
| Leakage Current | <1 mA at 2700 VCC |
| Resistencia de aislamiento | ≥500 MΩ at 1000 VCC |
| Temperatura de funcionamiento | -40°C to 70°C |
| Temperature Resistance | -40°C to 150°C |
| Short-Time Resistance | Up to 180°C for 2 horas |
| Reference Size | 624.7 × 67 mm |
| Espesor | 3.0 ±0.4 mm |
| Cold-Start Current | ≤18.4 A at 60 VDC and -40°C |
| Environmental Compliance | Cumple con RoHS |
Características del producto
| Característica | Descripción |
|---|---|
| Bottom Installation | Designed for installation beneath battery modules |
| Calefacción uniforme | Transfers heat evenly through direct contact |
| High Dielectric Strength | Withstands 2700 VDC for 1 minute |
| Reliable Insulation | Suitable for battery electrical environments |
| Flexible Structure | Conforms to flat or slightly curved surfaces |
| Adhesive Backing | Supports quick and stable installation |
| Customizable Design | voltaje, power, size and wiring can be customized |
Aplicaciones
| Solicitud | Descripción |
|---|---|
| Battery Module Heating | Bottom-mounted heating for battery cells |
| EV Battery Systems | Supports cold-temperature startup |
| Sistemas de almacenamiento de energía | Provides auxiliary module heating |
| PAQUETE DE BATERÍAS Calefacción | Improves low-temperature performance |
| Custom Thermal Management | Suitable for project-specific heating designs |
LYTH provides customized silicone rubber heating films for battery modules, batería, y sistemas de almacenamiento de energía. voltaje, power, dimensions, wiring, terminales, and installation structures can be matched to specific project requirements.
Formulario de Consulta ( nos pondremos en contacto con usted lo antes posible )
Quizás te guste también
» 41.6v 125ah LiFePo4 Módulo de batería 1P13S 5.2kwh paquete de batería ev 2020-2024 LYTH. » 41.6v 125ah LiFePo4 Módulo de batería 1P13S 5.2kwh paquete de batería ev.
