Silicone Rubber Heating Film for Battery Module Bottom Heating

» Accessori » Silicone Rubber Heating Film for Battery Module Bottom Heating

Silicone Rubber Heating Film for Battery Module Bottom Heating

CATEGORIA E TAG:
Accessori

inchiesta

Specifiche

Silicone rubber heating film is designed for battery module heating applications that require flexibility, electrical insulation, and reliable dielectric strength. It uses B-stage silicone rubber and a resistive heating element to provide a compact, adhesive-backed heating structure.

The heater is bonded to the bottom of the battery module and transfers heat to the cells through thermal conduction. This supports battery startup and stable operation in low-temperature environments.

Product Structure

Articolo	Valore
Base Material	B-stage silicone rubber
Heating Element	Resistive heating element
Adhesive Layer	Double-sided adhesive
Power Lead	UL3239 16 AWG silicone wire
Terminal	Molex 0768230321
Structure	Silicone + heating element + silicone + adhesive
Product Form	Flexible adhesive-backed heater

Technical Parameters

Articolo	Valore
Tensione nominale	51.2 VCC
Maximum Voltage	60 VCC
Potenza nominale	400 w
Rated Resistance	6.6 Ω ±20%
Dielectric Withstand	2700 VDC for 1 minute
Leakage Current	<1 mA at 2700 VCC
Resistenza di isolamento	≥500 MΩ at 1000 VCC
temperatura di esercizio	-40°C to 70°C
Temperature Resistance	-40°C to 150°C
Short-Time Resistance	Up to 180°C for 2 ore
Reference Size	624.7 × 67 mm
Spessore	3.0 ±0.4 mm
Cold-Start Current	≤18.4 A at 60 VDC and -40°C
Environmental Compliance	Conforme alla direttiva RoHS

Product Features

Caratteristica	Descrizione
Bottom Installation	Designed for installation beneath battery modules
Uniform Heating	Transfers heat evenly through direct contact
High Dielectric Strength	Withstands 2700 VDC for 1 minute
Reliable Insulation	Suitable for battery electrical environments
Flexible Structure	Conforms to flat or slightly curved surfaces
Adhesive Backing	Supports quick and stable installation
Customizable Design	Voltaggio, power, size and wiring can be customized

Applicazioni

Applicazione	Descrizione
Battery Module Heating	Bottom-mounted heating for battery cells
EV Battery Systems	Supports cold-temperature startup
Sistemi di accumulo dell'energia	Provides auxiliary module heating
Battery PACK Heating	Improves low-temperature performance
Custom Thermal Management	Suitable for project-specific heating designs

LYTH provides customized silicone rubber heating films for battery modules, pacchi batteria, e sistemi di accumulo di energia. Voltaggio, power, dimensioni, wiring, Terminali, and installation structures can be matched to specific project requirements.