Top Lithium Iron Phosphate Battery Supplier in China - LYTH

LiFePO4 Battery Module 12.6KWH/10.5KWH 1P24S/1P20S/2P14S/2P10S Battery Modules without BMS

» Battery Module » LiFePO4 Battery Module 12.6KWH/10.5KWH 1P24S/1P20S/2P14S/2P10S Battery Modules without BMS
  • LiFePO4 Battery Module 12.6KWH/10.5KWH 1P24S/1P20S/2P14S/2P10S Battery Modules without BMS

    CATEGORY AND TAGS:
    Battery Module, LFP Battery Module

    This battery module is a standard lithium iron phosphate module, which can be adapted to different sizes of standard boxes. Its superior charging and discharging performance and cycle life can effectively improve the power performance and range of the vehicle. This series of battery modules adopts multiple safety designs to ensure the safety of the whole product life cycle through all-round safety protection.

    enquiry
    • Specifications

    LiFePO4 Battery Module 12.6KWH/10.5KWH 1P24S/1P20S/2P14S/2P10S Battery Modules without BMS

     

     

    This battery module is a standard lithium iron phosphate module, which can be adapted to different sizes of standard boxes. Its superior charging and discharging performance and cycle life can effectively improve the power performance and range of the vehicle. This series of battery modules adopts multiple safety designs to ensure the safety of the whole product life cycle through all-round safety protection.

     

    D173F163A Battery Module Datesheet

    ModelD173F163A-1P24SD173F163A-1P20SD173F163A-2P12SD173F163A-2P10S
    Dimension/mm916*178.8*224.5770*178.8*224.5916*178.8*224.5770*178.8*224.5
    Nominal voltage/V77.2864.438.6432.2
    Nominal capacity(1C)/Ah163163326326
    Total Energy(1C)/kWh12.610.512.610.5
    Weight/kg76.66476.664
    Mass-Energy Density/Wh/kg164.4163.9164.4163.9
    Volume energy density/Wh/L342.6339.6342.6339.3
    Recommended SOC

    Use Window

    5%~95%
    Operating Temperature

    Range/℃

    Discharge: -30~60

    Charge: -30~60 (below 0℃ need to start heating)

    Storage Temperature

    Range/℃

    -20~45
    Cycle life25℃ ≥4000 cycles @1C/1C @2.5-3.65V @not less than 80% of initial capacity

    45℃ ≥2500 cycles @1C//1C @2.5-3.65V @not less than 80% of initial capacity

    Ambient Humidity15%~95%
    Ambient

    Air Pressure

    86kPa~106kPa

    (Please refer to the signed technical agreement for the specific parameters of the module at the time of delivery. For customization please contact us.)

    Safety Precautions

    1.Before using the battery, please read the specification carefully and pay attention to the marking on the surface of the battery module.

    2.During use, keep away from heat and fire sources, do not drop the battery, and prohibit dropping and impacting the battery module.

    3.Direct welding of battery modules and piercing of battery modules with nails or other sharp objects are prohibited.

    4.It is forbidden to turn the battery module upside down, and avoid knocking, throwing, stepping on and bending the battery module.

    5.It is forbidden to short-circuit the battery module to avoid danger and serious damage to the battery module.

    6.Please dispose of disused battery modules safely and properly, do not put them in fire or water.

    7.This battery module can only be charged with a special charger for lithium-ion batteries.

    8.Avoid over-discharging the battery module. When the battery voltage falls below a specified value, the internal battery may be permanently damaged and our product quality warranty is voided. When the discharge cut-off voltage falls below a specified value, the internal energy consumption of the system is minimized and the dormancy time is extended before recharging. The customer needs to train the user to recharge in the shortest possible time to prevent the battery module from going into over-discharge.

    9.Avoid charging the battery module at low temperatures prohibited by the specifications (including standard, fast, emergency, and regenerative charging), as unexpected capacity reduction may occur. The battery management system shall control the charging and regenerative charging temperatures in accordance with the minimum. Charging at temperatures lower than those specified in the specifications is prohibited, otherwise we are not responsible for the quality assurance.

     

    Individual pricing for large scale projects and wholesale demands is available.

    Please contact us for more details:

    Email: info@lythbattery.com
    Mobile/WhatsApp/Wechat: +86 13603880312

    contact information

    Enquiry Form ( we will get back you as soon as possible )

    Name:
    *
    Email:
    *
    Message:

    Verification:
    3 + 9 = ?

    Maybe you like also

  • Products

    Automatic Production Line

    Lifepo4 Prismatic Cells

    Lithium-ion Battery Cell

    Battery Module

    Lithium Battery Pack

    Sodium and LTO Batteries

    Charger

  • Company Information

    Address:Longyu Industrial Park, 4 Nanhua Road, Jianxi District, Luoyang City,China

    Phone:+86 13603880312
    Whatsapp:+86 13603880312
    E-Mail:info@lythbattery.com
    www.lythbattery.com

  • error: Content is protected !!