4Модуль батареи P3S 58 Ач VDA355 NMC

» Батарейный модуль » 4P3S 58Ah VDA355 NMC Battery Module

4Модуль батареи P3S 58 Ач VDA355 NMC

КАТЕГОРИИ И ТЕГИ:
Батарейный модуль, Модуль батареи NMC, Батарейный модуль VDA

4P3S 58Ah NMC battery module is an standard VDA355 lithium ion battery module with FPC solution which can maximises battery module stability and saves space. Он уже сертифицирован MSDS., UN38.3 и сертификация морских перевозок.

Условия доставки
Подробности упаковки коробки , поддоны или фанерные ящики
Условия доставки: EXW, ФОБ, СИФ, ДДУ, DDP
Способ доставки: По воздуху, морем, по суше

Условия оплаты
Розничная цена/Оптовая цена договорная
Условия оплаты Т/Т (Телеграфный перевод)

запрос

Характеристики

Module Introduction

The 4P3S 58Ah VDA355 NMC battery module is designed for EV battery pack integration where compact packaging, stable electrical output, and modular expansion are important. Based on a VDA355-oriented module concept, this module is suitable for passenger EV platforms, light commercial vehicle battery systems, and custom vehicle electrification projects that need a structured module foundation for pack design. Compared with direct cell-level integration, a module-based solution helps simplify pack architecture, improve grouping efficiency, and support scalable system development.

Cell Foundation

This module is built from CALB 0B5CE2L prismatic lithium-ion cells. According to the supplied specification, the cell is a 58Ah NMC power cell designed for traction battery applications and controlled module integration environments.

Вещь	Ценить
Cell Manufacturer	Лысый
Модель ячейки	`0B5CE2L`
Тип ячейки	Prismatic Lithium-Ion Cell
Химия	NMC
Номинальная мощность	`58Ah`
Номинальное напряжение	`3.67V` в `1C`; `3.73V` at standard discharge
Номинальная энергия	`212.86Wh` в `1C`; `216.34Wh` at standard discharge
Вес ячейки	`0.926 +/- 0.015kg`
Массовая плотность энергии	`233Wh/kg`
Объем ячейки	`0.406L` без терминала
Объемная плотность энергии	`516Wh/L`
ACR	`0.55-0.75 mOhm` в `70% SOC`, `1000Hz`
Температура зарядки	`-20C to 55C`
Температура нагнетания	`-30C to 55C`
Температура хранения	`-40C to 60C`
Диапазон напряжения	`2.75V-4.35V` when `0C <= T <= 55C`
Low-Temperature Voltage Range	`2.20V-4.35V` when `-30C <= T < 0C`
Быстрое время зарядки	`<=20 min` от `30% to 80% SOC`
Cell Width	`148.24 +/- 0.15mm`
Cell Thickness	`26.66 +/- 0.15mm`
Cell Height	`105.9 +/- 0.4mm` с терминалом
Cell Height	`102.8 +/- 0.4mm` без терминала

Derived Module Parameters

Based on a 4P3S конфигурация, the module uses twelve 58Ah NMC prismatic cells, with four cells connected in parallel and three groups connected in series. The following module values are derived directly from the supplied cell specification and the 4P3S electrical configuration.

Вещь	Ценить
Module Configuration	`4P3S`
Cell Quantity	`12`
Module Standard Positioning	`VDA355-oriented`
Номинальная мощность	`232Ah`
Номинальное напряжение	`11.01V` в `1C`; `11.19V` at standard discharge
Estimated Nominal Energy	`Approx. 2.55kWh` в `1C`; `Approx. 2.60kWh` at standard discharge
Standard Operating Voltage Range	`8.25V-13.05V` when `0C <= T <= 55C`
Low-Temperature Voltage Range	`6.60V-13.05V` when `-30C <= T < 0C`
Стандартный ток заряда	`Approx. 77.3A` based on `1/3C`
Estimated 1C Charge/Discharge Current	`232A`
Estimated Cell-Only Weight	`Approx. 11.11kg`
Estimated Total Cell Volume	`Approx. 4.87L` без терминала

Приложения

Application Area	Description
Passenger EV Battery Packs	Suitable for EV battery systems that require compact NMC module architecture and scalable pack integration
Light Commercial Vehicles	Supports electrification projects that need standardized module planning and efficient grouping
Custom Battery Enclosures	Suitable for projects that benefit from VDA355-style module packaging logic
Modular Traction Battery Platforms	Useful for prototype and development-stage vehicle battery systems
Custom Electrification Projects	Practical for tailored battery pack development based on module-level architecture

LYTH focuses on turning battery cells into practical module and PACK solutions for real vehicle and energy projects. Помимо поставок аккумуляторной продукции, we support customers with module configuration planning, structure matching, application-oriented development, and follow-up PACK integration based on project requirements. If you are looking for a VDA355-standard NMC battery module for EV battery systems, LYTH can support your project from cell selection to module design and scalable system cooperation.